DRK208A Melt Index Meter
DRK208A Melt Index Meterkukubonakalisa iimpawu zokugeleza kweepolymers ze-thermoplastic kwi-viscous flow state, kwaye isetyenziselwa ukumisela izinga lokuhamba kwe-melt mass flow (MFR) kunye ne-melt volume flow rate (MVR) ye-resin thermoplastic.
Iimbonakalo
Uluhlu lwemitha yesantya sokuncibilika kweDRK208 luyilwe kwaye lwenziwa ngokwemigangatho yamva nje yesizwe neyehlabathi. Idibanisa iingenelo zeemodeli ezahlukeneyo ekhaya nakwamanye amazwe, kwaye ineenzuzo zesakhiwo esilula, ukusebenza ngokulula, kunye nokugcinwa lula.
Usetyenziso
Ayifanelekanga kuphela kwiiplastiki zobunjineli ezifana ne-polycarbonate, i-nylon, i-fluoroplastics, i-polyarylsulfone, njl., kunye nobushushu obuphezulu bokunyibilika, kodwa kunye ne-polyethylene, i-polystyrene, i-polypropylene, i-resin ye-ABS, i-polyoxymethylene resin, i-nylon fluoroplastics, njl. izinga lokuhamba kwiqondo lokushisa eliphezulu. Sisixhobo esifanelekileyo sokuvavanya iifektri, amashishini, iiyunithi zophando lwezenzululwazi, iikholeji kunye neeyunivesithi, ulongamelo lobugcisa, kunye nokuhlolwa kwemveliso kunye nolamlo.
Umgangatho wobuGcisa
Isixhobo sihambelana ne-GB3682, ISO1133, ASTMD1238, ASTMD3364, DIN53735, UNI-5640, JJGB78-94 kunye neminye imigangatho.
IParameter yeMveliso
| Iprojekthi | Ipharamitha |
| Umphanda | Idayamitha yangaphakathi: 9.55±0.025mm Ubude: 160 mm |
| Piston Head Diameter | 9.475±0.01 mm |
| Yifa | I-diameter yangaphakathi: 2.095 mm Ubude: 8±0.025 mm |
| Iqondo lobushushu(℃) | Ubushushu begumbi—400℃ |
| Isigqibo | 0.1℃ |
| Ukuchaneka | ±0.2℃ |
| Uluhlu lokulinganisa | 0-30mm |
| Ukuchaneka | ±0.05mm |
| Ukuchaneka koMlinganiselo wesixhobo | ±10% |
| I-Voltage | 220V±10% 50HZ |
| Amandla okufudumeza | 550W |
Uqwalaselo lweMveliso
Inginginya enye, isatifikethi, incwadi, izixhobo ezixhasayo
Iindidi zeemveliso
-
Ifowuni
-
I-imeyile
-
Whatsapp
-
Phezulu